TradeReign
Back to HomeEducation HubCompatibilityAboutDisclosures
Tradovate Web

How to Set a Trailing Stop on Tradovate Trailing Stop, Auto Trail and Auto Breakeven

Practice with a simulated account first. The standalone order type and an ATM stop type are separate settings. Confirm which one you selected before interpreting what a working stop does.

Quick Answer

In Tradovate Web, use a Trailing Stop order to trail from the time it is working. Use Auto Trail in an ATM bracket when you want the working stop to start at one price and trail only after a profit trigger. Auto Breakeven + Auto Trail adds a separate one-time move before the trail starts.

Start 7-Day TrialMore Guides

Compare standalone Auto Breakeven and the combined preset

Synthetic MES 1-minute candles. Times are bar closes in ET.

The amber line is the illustrative working stop. It moves from 5,998.00 to 6,000.25 at the breakeven trigger, then to 6,001.50 at the trail trigger. The next one-tick advance leaves the stop unchanged. At 6,003.50 the stop steps up to 6,002.00 and holds on the pullback. The setup assumes the qualifying prices reach each trigger.

Initial stop

Distance from the fill when the bracket first becomes active.

Profit trigger

Favorable movement required before breakeven or trailing activates.

Frequency

Additional favorable ticks needed for each step after Auto Trail activates.

Set a standalone Trailing Stop in Tradovate Web

In the DOM, open the gear menu and choose Stop Type. Select Trailing Stop for the right-click stop order, or select a trailing order type directly in the Order Ticket where available. In simulation, verify the contract, side, quantity, and working stop price. For an existing long, a protective stop is a sell order below the market. For an existing short, it is a buy order above the market.

A standalone trailing stop follows favorable movement once working. Tradovate Web does not let you specify a custom step frequency for this order. If using a Trailing Stop Limit, review the limit price too. A triggered limit can stay working while the position remains open. A stop-market fill can differ from the trigger price.

Set up Tradovate Auto Breakeven by itself

In the Tradovate Web chart or DOM, open the ATM settings gear and use ticks for this exercise. Set Stop Loss Type to Auto Breakeven. Enter the initial Stop Loss distance, the Profit Trigger that activates the move, and the Offset from the entry price. Save the preset, select it, and enable ATM before placing a simulation entry.

In the synthetic short scenario, one MES fills at 6,000.00 with an eight-tick initial stop at 6,002.00. An eight-tick Profit Trigger corresponds to 5,998.00. Tradovate checks both the last trade and the ask for a short. This example assumes both reach the trigger. The favorable two-tick offset for a short puts the buy stop at 5,999.50. Check the offset sign in the simulation preset. After the adjustment, verify the resulting stop price and quantity in Orders. Standalone Auto Breakeven leaves it there as price makes another low.

To cover an illustrative $1.60 round trip at $1.25 per MES tick, divide $1.60 by $1.25 and round up to two whole ticks. A fill at the 5,999.50 stop would earn $2.50 gross and $0.90 net. One tick of adverse slippage, to 5,999.75, would earn $1.25 gross and lose $0.35 net. The chart shows the stop adjustment. Those two exit prices are separate hypothetical fills.

Create and enable an ATM Auto Trail preset

Open the gear beside the ATM toggle in the chart or DOM, select ticks for the exercise, and create a preset. In Stop Loss Type, choose Auto Trail or Auto Breakeven + Auto Trail. Enter the initial Stop Loss, then enter Auto Trail’s Profit Trigger, Stop Loss distance and Frequency in the trail section. For the combined preset, also enter the separate breakeven Profit Trigger and Offset.

Turn ATM on, save the preset, and confirm it is selected in the same module that submits your simulated entry. After the entry fills, watch the actual protective order become active. Follow its price in the orders list as the triggers are reached.

Work through the MES example

Assume a hypothetical one-contract long at 6,000.00 and one tick equal to 0.25 points. In the combined preset, set the initial stop eight ticks away. Set breakeven to a six-tick trigger with a one-tick offset. Set the trail to a 12-tick trigger, a six-tick trail distance, and a two-tick frequency.

The initial stop is 5,998.00. At 6,001.50, the breakeven step moves it to 6,000.25. At 6,003.00, the trail activates 1.50 points behind the trigger, at 6,001.50. At 6,003.25 the stop holds because the move since the trigger is only one tick. At 6,003.50 it rises to 6,002.00.

The bars summarize a hypothetical sequence. A candle high alone cannot tell you which qualifying prices the platform used, when the order changed, or how an exit would fill. A stop at entry plus one tick can still produce a net loss after costs and slippage.

Check an Auto Trail that appears stuck

Confirm the simulated entry filled with ATM enabled and the intended preset selected. Verify the account, instrument, stop status and price, then check the trigger and frequency in ticks. Distinguish the initial Stop Loss distance from the distance in the Auto Trail section.

Compare order updates with the price sequence. Price can reach a new high without reaching the next frequency step. Also check whether another bracket leg filled, an order was rejected, or a triggered stop-limit order left a working limit. Check the open position and working orders before placing any replacement.

Sources

Official References

Platform details on this page were checked against these official resources.

Tradovate breakeven trigger and offsetHow the last trade and the relevant bid or ask govern the stop adjustment.Tradovate ATM stop typesOfficial Auto Breakeven, Auto Trail and combined examples.Tradovate ATM setup in the Chart moduleFind the ATM settings, choose ticks and activate the preset.Tradovate DOM stop typeFind the Stop Type setting for right-click orders.Tradovate order typesThe official definition of a trailing stop order.
Related Guides

Keep Building the Rule System

Calculate the two prices in a fixed ATM stop-limit

Check the trigger and limit fields before comparing a fixed stop-limit with a trailing version.

Convert a futures offset from ticks to dollars

Check each contract’s tick value before comparing fees and stop offsets.

Place your first stop loss on Tradovate

Compare stop-market and stop-limit orders and check the working quantity.

Compare NinjaTrader Web and Desktop trailing stops

Find the Web Order Ticket fields and the separate Desktop ATM steps.

Compare moving to breakeven with keeping the original stop

Replay two MES price paths and compare outcomes after costs.

FAQ

Common Questions

What does Frequency mean in Tradovate Auto Trail?

It is the favorable tick movement required for another stop adjustment after the first trail trigger. In the example, a two-tick frequency on MES means each step needs another 0.50 points.

Does Auto Breakeven keep trailing?

Auto Breakeven moves the stop once when its trigger is reached. Use Auto Breakeven + Auto Trail to add a separate trigger that starts trailing.

How many ticks does an Auto Breakeven offset need to cover fees?

Divide your round-trip cost per contract by its dollar tick value, then round up to a whole tick. That estimates the move a fill needs to cover fees. Actual execution at a different price can change the result.

Why did the stop stay still after price made a new high?

The new high may be short of the next step, or the active order may use a different preset or order type. Check the actual working stop and order history in simulation.

Risk Disclosure

Futures trading contains substantial risk and is not suitable for every investor. TradeReign is a trading-discipline and rule-enforcement application. It does not provide trading advice, trade signals, investment recommendations, or performance guarantees.

TradeReign is not a broker-dealer, futures commission merchant, or investment advisor.

Futures trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Only risk capital - money that can be lost without jeopardizing financial security or lifestyle - should be used for trading. Past performance is not necessarily indicative of future results.