TradeReign
Back to HomeEducation HubCompatibilityAboutDisclosures
Micro E-mini Nasdaq-100

How to Size an MNQ Trade From Your Stop

Start with the entry and stop prices you already planned. The calculator converts that distance into dollars and shows how many whole contracts fit your inputs.

The examples use hypothetical budgets and costs. Use your own account rules, fee schedule, and slippage assumptions when you run the numbers.

Quick Answer

Each MNQ contract moves $2 per point, or $0.50 per quarter-point tick. Multiply your stop distance in points by $2 and add estimated round-trip costs per contract. Divide your dollar risk budget by that amount and round down. Then apply any lower account cap.

Start 7-Day TrialMore Guides

Futures Position Size Calculator

Enter your own budget and either entry and stop prices or a stop distance to compare estimated dollar risk with whole-contract sizing. Starting values are illustrations, not recommended settings. Nothing here changes your account or places an order.

Micro E-mini Nasdaq-100 (MNQ): $2.00 per point; 0.25 points per tick; $0.50 per tick. Stop distance is the absolute difference between entry and protective stop, for either a long or a short.

Estimated risk for proposed contracts
$80.00
Whole contracts within budget
2

Long setup based on the entry and stop prices.

Stop used: 20 points / 80 ticks. Stop-only risk per contract: $40.00. Including your allowance: $40.00.

The proposed contracts fit your entered risk budget under these assumptions.

Estimated risk at the maximum size of 2 contracts is $80.00. Unused risk budget is $20.00.

Estimated risk = contracts × (stop points × dollars per point + per-contract cost allowance). Budget-based count = budget ÷ estimated risk per contract, rounded down. An optional cap can only reduce that count.

Costs default to $0; enter your own round-trip commissions, fees, and slippage allowance. Stops do not guarantee a fill price or maximum loss. Verify the live rate, available funds and account rules with your broker or firm. The estimate uses a single per-contract rate and excludes spread offsets and portfolio margin. A contract cap here applies only to the selected instrument; it does not convert mixed micro/mini positions or reserve capacity for other open trades.

Tick-value chart and CME contract specifications. Educational estimates only. Verify current specifications and account rules before trading.

$2 per point

A 20-point move is $40 per MNQ contract before fees.

$0.50 per tick

Four ticks make one point. A 20-tick move is five points, or $10 per contract.

Round down

If one contract exceeds the budget, the result is zero whole contracts.

How do you turn a stop price into dollar risk?

Suppose a long entry is planned at 20,125.00 with a protective stop at 20,105.00. The prices are 20 points apart. Enter both prices, choose Distance in points and enter 20, or choose Distance in ticks and enter 80. Both give $40 of stop-only risk for one MNQ. A short with a stop 20 points above entry has the same stop-only estimate.

Add your round-trip commissions and fees for one contract, plus the dollar allowance you choose for slippage. One extra tick of slippage adds $0.50 per contract. Enter the combined allowance once in the calculator.

What if fees change how many contracts fit?

With an illustrative $120 budget and a 20-point stop, three contracts cost exactly $120 at the stop price before fees. Add a hypothetical $2 allowance per contract and each estimates $42. Two contracts estimate $84 and three estimate $126, so the budget fits two.

For a 30-point stop with the same $2 allowance, each contract estimates $62. The same $120 budget fits one. If the available budget is only $50, zero contracts fit that setup.

MNQ vs. NQ: Compare Position Size After Costs

MNQ moves $2 per point ($0.50 per tick) and NQ moves $20 per point ($5 per tick). At the same 20-point stop distance, ten MNQ and one NQ both have $400 of stop-only exposure. Fees and slippage depend on the instrument and number of contracts traded.

Try the calculator with a $415 risk budget and the same 20-point stop. Assume $2 of round-trip costs and slippage per MNQ and $5 per NQ. Ten MNQ estimate $420 of risk, so only nine fit at $378. One NQ estimates $405 and fits. Switch the contract and replace the cost input each time. The amounts are illustrative allowances, not broker rates.

With a $200 budget and the same inputs, four MNQ fit at $168, and one NQ exceeds the budget. A micro lets you change the position in smaller increments. Apply your account’s contract cap and applicable margin separately. Verify the full expiry on both instruments and use the planned stop distance for the symbol you actually intend to trade.

When One Tick Changes How Many MNQ Contracts Fit

Keep the modeled stop at 20,105.00 and the risk budget at $120. Allow $2 per contract for fees and slippage. At an entry of 20,134.00, the distance is 29 points, or 116 ticks. Stop-only risk is $58 per contract. With costs it is $60, so two contracts use exactly $120.

Change only the entry to 20,134.25. The stop is now 117 ticks away. That adds $0.50 in risk per contract. The estimate is $60.50 for one or $121 for two, so the budget fits one before any account cap. Both scenarios use the same fictional bars. The entry markers show where the proposed prices were reached, and no fill is assumed.

To reproduce the difference in the calculator above, enter the same stop, $120 risk budget, and $2 allowance, then change only the entry field. If a planned entry moves, recompute the count using the actual distance before placing the order. The projected risk assumes the stated stop fill and cost allowance.

Same MNQ stop and budget, entry one tick apart

Synthetic MNQ 5-minute candles. Times are bar closes in ET.

The 9:50 bar reaches the first planned entry. The stop is 29 points away. With $2 per contract in costs, two MNQ estimate exactly $120 of total risk.

When does the account limit reduce the count?

Suppose your budget fits two MNQ, but your confirmed account rules leave capacity for one additional MNQ. Enter one as the cap. If the account has no room for another contract, the answer is zero for a new entry.

Check the active account stage, positions you already hold, and working orders that could fill. If the firm counts mixed micro and E-mini positions together, confirm how it counts them before entering the remaining MNQ capacity. Margin is a separate check.

What should you check before sending the order?

Check the actual symbol and contract month, the stop unit, the proposed quantity, and the cost allowance. MNQ and NQ differ by a factor of ten in dollar exposure per point. At a 20-point stop, one MNQ estimates $40 before costs and one NQ estimates $400.

Recalculate if the entry price changes and the stop stays fixed. Stop prices are triggers. The actual fill can be worse during a gap or when liquidity is thin, even with a slippage allowance.

Sources

Official References

Platform details on this page were checked against these official resources.

CME E-mini Nasdaq-100 futures specificationsNQ contract multiplier and minimum tick increment.CME Group Micro E-mini futures specificationsExchange source for the MNQ multiplier and outright tick value.
Related Guides

Keep Building the Rule System

Calculate MNQ break-even after fees and a partial exit

Use the first fill and all trade costs to check the price required on the remaining contract.

Compare MES and MNQ stop risk

Use two synthetic charts to see how tick value and stop distance affect dollar risk.

Futures Position Size Calculator

Compare sizing across MES, ES, MNQ, and NQ.

Futures Tick Value Calculator

Convert an MNQ price move to dollars before costs.

Futures Risk Per Trade

Estimate dollar risk for a chosen contract count and stop.

Futures Prop Firm Scaling Plans

See how account stages can change contract limits.

Set a Stop Loss on Tradovate

Place a protective order and verify its status and quantity.

FAQ

Common Questions

How many points is 40 ticks on MNQ?

40 ticks is 10 points. At $0.50 per tick, that is $20 per contract before costs.

How many MNQ contracts fit a $100 budget with a 20-point stop?

At $40 per contract before costs, two contracts fit and three exceed the budget. With a $2 allowance per contract, two estimate $84. A lower account cap can reduce the count further.

Does one NQ always count as ten MNQ at a prop firm?

The stop-only dollar exposure is equivalent when the stop distance is the same. Check the firm's separate rules for counting micros, minis, and combined positions at your current stage.

Is trading ten MNQ the same as trading one NQ?

At the same stop distance, the stop-only dollar exposure matches. Compare round-trip costs, fills, margin requirements and any account contract cap separately.

Can TradeReign check my contract cap?

TradeReign offers a configurable max position size rule for supported Tradovate workflows. This educational calculator uses the cap you enter. Verify your broker or prop firm's cap before configuring a rule.

Risk Disclosure

Futures trading contains substantial risk and is not suitable for every investor. TradeReign is a trading-discipline and rule-enforcement application. It does not provide trading advice, trade signals, investment recommendations, or performance guarantees.

TradeReign is not a broker-dealer, futures commission merchant, or investment advisor.

Futures trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Only risk capital - money that can be lost without jeopardizing financial security or lifestyle - should be used for trading. Past performance is not necessarily indicative of future results.