TradeReign
Back to HomeEducation HubCompatibilityAboutDisclosures
NinjaTrader Desktop

NinjaTrader ATM Strategy Stop and Target Setup

An Advanced Trade Management strategy submits stop and target orders as an entry fills. This simulated two-target example shows what to enter and what to check after the position changes.

Quick Answer

In NinjaTrader Desktop, open Chart Trader or SuperDOM and choose Custom in the ATM Strategy menu. Set the order quantity, then choose Ticks and enter stop and target offsets for each bracket. Save the template, select it before entry, and verify the working exit prices and quantities after the fill.

Start 7-Day TrialMore Guides

Use the correct account

Verify the simulation account and futures contract before placing a test order.

Split the quantity

For a two-contract entry with two separate targets, assign one contract to each bracket.

Check the remainder

After the first target fills, verify the remaining position and its working stop quantity.

Calculate position size before setting ATM order quantity

Use the position size calculator linked below to enter your contract, risk budget, and distance from the planned entry to your stop. Add estimated costs per contract. Suppose you have a $25 trade budget and an eight-tick MES stop. Each contract uses $10 at the stop plus an illustrative $2 for round-trip fees and slippage. Two contracts use an estimated $24. Three would use $36. Verify the available margin and any account cap before entering the smaller supported quantity.

To practice with the two-target template below, use your simulator. Enter two in Order Quantity, select Ticks, and allocate one contract to each target row. Enter eight in both Stop Loss fields. If the entry fills at your planned price, that places both stops two points away. Verify the executed quantity and actual stop price in Orders. A different entry price can move a tick-based stop away from the chart level you planned.

For a separate local ATM with a single bracket, NinjaTrader also supports Currency. At two MES contracts, a $20 Currency stop corresponds to eight ticks of gross price movement. At one MES contract, the same $20 corresponds to 16 ticks. Keeping the same eight-tick stop after changing quantity keeps the price distance constant. Fees and slippage belong in the sizing estimate, and the stop price can differ from the eventual fill.

How to create a two-target ATM template

Open Chart Trader or SuperDOM, select your simulation account and the intended MES contract, and set Order Quantity to two. In ATM Strategy, choose Custom to open the parameters window.

Set Parameter Type to Ticks. Add a second target row. Set Quantity to one in each row and Stop Loss to eight in both rows. In the Profit column, enter 12 for the first target and 24 for the second. For this example, leave automatic breakeven and trailing adjustments off.

Select Save as Template, give it a name you can recognize, and select it in the ATM Strategy menu before placing the simulated entry. Check account, contract, order quantity, and template together.

How to check the stop and target prices after a fill

Assume both MES contracts fill long at 6,000.00. One MES tick is 0.25 points. The eight-tick stops should sit at 5,998.00. The 12- and 24-tick targets should sit at 6,003.00 and 6,006.00, with one contract assigned to each. Check against your actual fill prices when you run the example.

At $1.25 per MES tick, the initial stop distance represents $10 per contract or $20 for both before fees and slippage. Check the working exits in the Orders tab. Two stop orders at the same price can appear together on the trading display.

After the first target fills, verify that the position is down to one contract and that the remaining working stop and target each cover one. The filled bracket's linked stop should cancel. If orders are rejected or the position and exits disagree, check the order status and your broker account before relying on the bracket.

Check a missing ATM stop or target after a partial fill

In Control Center, compare the entry’s Quantity, Filled and Remaining fields in Orders. Confirm the dated contract and account. Then compare Positions and the state, side and quantity of its exit orders. Use the Log if an order was rejected. Chart Trader can group stops at the same price, so check the individual order rows.

Suppose a two-contract MES entry has one fill at 6,000.00, one contract still working, and no exits filled. A working stop for one contract at 5,998.00 matches the one open contract in this example. The second requested contract has yet to fill. NinjaTrader’s local ATM documentation says the selected template starts on a partial or complete entry fill. Recheck the exits when the entry or position changes.

If both contracts have filled and the position is still two, a working stop quantity of one leaves a discrepancy. Check the rest of the orders and any rejection before submitting another entry or exit. NinjaTrader’s local ATM documentation says a rejected exit can result in the ATM’s other stop and target orders being canceled. Use the broker’s position and order records if Desktop’s state is unclear.

Apply a NinjaTrader ATM to an already-open position in simulation

Selecting a saved template in the entry panel sets it for a new order. To practice attaching a saved local ATM to an open simulation position that has no bracket, verify the position and check Orders for existing exits and any remaining entry quantity. Then open Control Center → Positions, right-click the exact instrument row, and choose Apply ATM Strategy and the saved template.

NinjaTrader documents that this command uses the current market price as its entry reference. Suppose your original simulated MES fill was 6,000.00 and the reference at application is 6,001.50. An eight-tick stop and a 12-tick target would then be 5,999.50 and 6,004.50 in this one-contract example. Those are measured from 6,001.50. The Positions tab still carries the original fill, which remains the basis for the trade’s P&L.

After applying the template, verify the working stop and target prices, side and quantity in Orders. Keep the example in simulation. For an uncertain live position, check the broker’s own records before changing orders.

What happens if you submit another entry?

Look at the ATM Strategy menu before each order. A saved template starts a new ATM on a fill. A selected active ATM can apply the new fill to the existing stop and target orders. With None selected, the order starts without an ATM bracket.

Check the ATM Strategy Selection Mode in Chart Trader or SuperDOM Properties. NinjaTrader can select the active ATM automatically after an entry or keep the saved template selected for the next order. Which item is selected matters when more than one order is open.

How TradeReign fits when NinjaTrader routes to Tradovate

NinjaTrader manages the ATM orders. For supported activity on a Tradovate-backed account, separately connect that same account in TradeReign and confirm the account, environment, and active monitoring. A local Sim101 test exercises the NinjaTrader template on the local simulator. Use an eligible Tradovate Demo account to test the connected workflow.

NinjaTrader® is a registered trademark of NinjaTrader Group, LLC. No NinjaTrader company has any affiliation with the owner, developer, or provider of the products or services described on this website, or any interest, ownership, or otherwise, in any such product or service, and no NinjaTrader company endorses, recommends, or approves any such product or service.

Sources

Official References

Platform details on this page were checked against these official resources.

NinjaTrader local ATM strategy parametersHow order quantity and the Ticks and Currency parameter types affect a bracket.NinjaTrader Orders tabFilled and remaining quantities, strategy name, order state and OCO identifiers.NinjaTrader Positions tabThe Apply ATM Strategy command and its current-market-price reference.NinjaTrader local ATM FAQHow existing positions and rejected ATM exits are handled.NinjaTrader Desktop two-target ATM exampleTarget rows, quantities, offsets, and template saving.NinjaTrader ATM selection modesHow the menu behaves after an entry and what the next order uses.Connect a Tradovate account to NinjaTrader DesktopHow to identify a Tradovate-backed connection and select simulation or live.CME Micro E-mini futures specificationsThe MES minimum price increment and dollar value per tick.
Related Guides

Keep Building the Rule System

Compare server-side and local NinjaTrader ATM

Check how the mode changes brackets when you add a contract or lose the Desktop connection.

Calculate your futures order quantity

Compare stop risk, estimated costs, margin capacity, and any account contract cap.

Find a missing Chart Trader order line

Check the chart account and dated instrument against Control Center.

Close one ATM and verify what stays open

Compare the selected ATM’s quantity with the total position and working brackets.

Check the ATM after rolling a NinjaTrader position

Verify both contract fills and whether a new stop and target are working.

Estimate the payoff of two futures targets

Compare the combined target payoff with the nearest-target ratio.

Troubleshoot a rejected NinjaTrader ATM exit

Match the first rejection in Log with each exit and its OCO group.

Link two NinjaTrader orders manually

Practice placing a manual bracket for a position that already exists.

Set up NinjaTrader Auto Trail or Auto Breakeven

Compare separate and combined settings on the same candles.

Choose a NinjaTrader simulation account

Verify Sim101 or broker Demo before testing the template.

Set up NinjaTrader Market Replay

Choose a downloaded session and verify the Playback101 practice account.

Keep NinjaTrader Running

Check connection and feed health before using Desktop.

Connect Tradovate to NinjaTrader Desktop

Set up the connection and verify the account before using an ATM template.

Set a NinjaTrader Daily Loss Limit

Configure the separate account-level loss trigger.

Futures Tick Value Calculator

Convert the entry-to-stop distance into dollars before fees.

Maximum Risk Per Trade Calculator

Check stop-defined risk for the full quantity and a cost allowance.

Tradovate ATM and Stop-Loss Setup

Use the corresponding setup when entering from Tradovate Web.

Connect Tradovate to TradingView

Verify the broker account when switching order-entry platforms.

FAQ

Common Questions

What does ATM mean in NinjaTrader?

ATM stands for Advanced Trade Management, the rules NinjaTrader uses to place and manage protective stops, targets, and related exit adjustments.

Can I use two profit targets with one ATM template?

Yes. Add a target row and allocate the order quantity across both rows. Check that the working brackets reflect the filled quantity.

Why is my NinjaTrader ATM stop at a different price?

For Ticks parameters, calculate the offset from the actual entry. Partial fills and enabled Stop Strategy adjustments can affect the working orders. Confirm the stop price and quantity in Orders.

Can I apply a NinjaTrader ATM to an open position?

NinjaTrader Desktop documents a separate Apply ATM Strategy command in the Positions tab. It uses the current market price as its entry reference. Check existing orders first and verify the resulting stop and target in Orders.

Risk Disclosure

Futures trading contains substantial risk and is not suitable for every investor. TradeReign is a trading-discipline and rule-enforcement application. It does not provide trading advice, trade signals, investment recommendations, or performance guarantees.

TradeReign is not a broker-dealer, futures commission merchant, or investment advisor.

Futures trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Only risk capital - money that can be lost without jeopardizing financial security or lifestyle - should be used for trading. Past performance is not necessarily indicative of future results.