TradeReign
Back to HomeEducation HubCompatibilityAboutDisclosures
Futures Trading Education

ICT Concepts for Futures Traders Read the Chart One Candle at a Time

ICT stands for Inner Circle Trader, the name Michael Huddleston uses for his trading education. The lessons use fictional five-minute futures candles to show price patterns, retracements, New York timing and comparisons between MES and MNQ.

Quick Answer

Start with a known high or low, watch whether price crosses and returns, then check whether a subsequent close breaks an opposite swing. A three-candle fair value gap can form during that move. Each observation has a separate confirmation time.

Start 7-Day TrialMore Guides
Fictional MES chart marking a liquidity sweep at 9:45, a close above the swing high at 9:50 and a fair value gap confirmed at 9:55 New York time.

When each event became knowable

  1. 9:45 ET. Price trades below 5,998.00 and closes back above it at 5,999.25, confirming the liquidity sweep.
  2. 9:50 ET. The close at 6,002.25 breaks the 6,000.75 swing high, which had become knowable at 9:40. The structure shift replay shows what happens when the next candle forms a gap and when it doesn’t.
  3. 9:55 ET. The third candle closes with a low of 6,001.00, above the 9:45 high of 5,999.75. The fair value gap is first known at 9:55. The 10:00 bar then trades back into it.

Fair Value Gap

In a bullish fair value gap, candle three’s low sits strictly above candle one’s high. In a bearish gap, candle three’s high sits strictly below candle one’s low. Wait for candle three to close before recording the zone.

Balanced Price Range

A balanced price range (BPR) is the part of a bullish and a bearish fair value gap that overlaps. Its lower edge is the higher of the two gap lows. Its upper edge is the lower of the two gap highs. Under this guide’s rule the upper edge must be above the lower edge.

Liquidity Sweep

For the one-bar sweep rule in this guide, mark a high or low known before the test. Price must trade at least one tick beyond it and close back on the original side during that bar.

Market Structure Shift

In this example, mark a confirmed opposite swing before the sweep. A bullish shift requires a subsequent close above that swing high after a low is swept. A bearish shift requires a close below the swing low after a high is swept.

Order Block

For the rule used in these examples, find the last down candle before an immediate strong close above a premarked high, or the last up candle before a strong close below a premarked low. Use that opposing candle’s full high-to-low range for the zone.

Displacement Candle

Compare a candle’s body with recent bodies and see where it closes within its own range. This lesson flags a body at least twice the median of the prior four bodies with a close in the final quarter of the range in the move’s direction.

Optimal Trade Entry

Measure one directional price leg and mark the band 62% to 79% back from the end of the move toward its origin. The middle reference is 70.5%. In this lesson the swing endpoint must be confirmed before you count a revisit.

Kill Zones

A kill zone is a time filter. For this index-futures exercise, use 8:30–11:00 a.m. New York time and include bars that open at or after 8:30 and before 11:00. For decisions made at bar close, record that later timestamp separately.

SMT Divergence

Compare equivalent highs or lows in two related markets. In these examples one market trades beyond its first reference while the other holds its own reference on the corresponding completed bar.

Inversion Fair Value Gap

Mark the original three-candle fair value gap. Under this lesson’s rule, a later close through the far edge confirms inversion and keeps both original boundaries. A wick through the edge or a close exactly on it fails the test.

Breaker Block

In the breaker pattern shown here, price takes a prior swing extreme, then closes through the intervening swing in the opposite direction. The original candle’s zone becomes a reference for a later revisit. The matching mitigation comparison has a failure swing that stops short of the prior extreme.

Unicorn Model

Mark the confirmed breaker block and the same-direction fair value gap from its reversal. The ICT Unicorn zone is the price range they share. Its low is the higher of their lows. Its high is the lower of their highs. This lesson requires at least one tick of width.

Silver Bullet Times

The three ICT Silver Bullet windows are 3:00–4:00 a.m., 10:00–11:00 a.m., and 2:00–3:00 p.m. in New York local time. Set your chart or session tool to America/New_York so the hours follow daylight saving time.

Power of Three

ICT Power of Three, or AMD, describes a range, an excursion through one side and a move in the other direction. In this replay exercise, freeze the range first, require a close back inside after the sweep, then wait for a later close through the opposite edge.

Dealing Range

A dealing range is the interval between a selected high and low. Its midpoint is equilibrium. Within that range, prices above equilibrium are in premium and prices below are in discount. The label always depends on which high and low you chose.

Internal vs. External Range Liquidity

Mark the high and low of your reference range before the move. In this exercise a fair value gap inside it is an internal reference. The marked highs and lows define the edges to watch for external liquidity. The same swing high can be the edge of a smaller range and an internal reference in a larger one.

Draw on Liquidity

A draw on liquidity is a price objective selected before a move, often a prior session high or low. Write down the reference, why you selected it and the deadline for reviewing it. Treat it as a hypothesis about a level price may reach.

Daily Bias

ICT daily bias is a directional expectation based on higher-timeframe context. Write down the price objective, what would invalidate the idea and when you will stop tracking it. Keep a neutral view when the context is unclear. Use a separate rule to decide whether an entry qualifies.

Judas Swing

ICT uses Judas Swing for an early move against a directional premise, followed by a reversal. Mark your time window and references first. In this futures drill, price must sweep the selected overnight boundary and close back inside before a later bar confirms through the midnight open.

Study one definition at a time

A sweep can occur without a structure shift. A structure shift can occur without a three-candle gap. Draw and log each event separately before trying to combine them. This makes it possible to tell which step was missing in a near miss.

Use the displacement lesson to measure the departure candle’s body and close. In the order block lesson, compare the origin of the move with the gap that can form later.

The Optimal Trade Entry lesson maps a retracement to the futures tick grid. The kill zones and Silver Bullet lessons explain which bars belong to a window and when a close-based decision becomes possible.

Use paired MES and MNQ charts to identify SMT divergence. Then compare an ordinary fair value gap with a zone that switches direction after a close through its far edge.

The chart rules state which candles you need and when. Other traders may use a different swing length, minimum separation or reclaim window. Compare results only after writing down those differences.

Practice in replay

Replay a dated futures contract, using standard candlesticks and a consistent session and time zone. Before advancing, write the reference level, the price that would qualify, and the current decision. Then reveal the next bar.

Include misses and failed follow-through. A correctly labeled chart example teaches a definition. An evaluation of trading results also needs entry, exit, costs and fill rules applied to a broader sample.

Sources

Official References

Platform details on this page were checked against these official resources.

The Inner Circle Trader’s 2022 mentorship lessonOriginal discussion of fair value gaps and market structure shifts.
Related Guides

Keep Building the Rule System

Fair Value Gap chart examples

Read bullish and bearish ICT fair value gaps on MES charts. Calculate consequent encroachment and distinguish a midpoint touch from a full revisit.

Balanced Price Range chart examples

Draw an ICT balanced price range from two opposing fair value gaps. Compare one-tick overlap and touching edges on paired MES charts.

Liquidity Sweep chart examples

Compare ICT liquidity sweeps with closes beyond the range on synthetic MES charts. Learn what a candle can tell you when it crosses both sides.

Market Structure Shift chart examples

Compare bullish and bearish ICT market structure shifts, a wick-only break, and two futures charts with the same shift that may or may not form a fair value gap.

Order Block chart examples

Compare bullish and bearish ICT order block examples on fictional MES candles. Mark the originating candle, confirming close and separate fair value gap.

Displacement Candle chart examples

Read bullish and bearish ICT displacement candles on fictional MES charts. Measure the body and close, and compare a wide wick that fails the rule.

Optimal Trade Entry chart examples

Draw an ICT Optimal Trade Entry zone on fictional MES candles. Use the 62%, 70.5%, and 79% levels, check valid ticks, and avoid hindsight in replay.

Kill Zones chart examples

Mark ICT kill zones in New York time on a futures chart. Use fictional MES bars to distinguish window boundaries, cash open and daylight saving.

SMT Divergence chart examples

Compare ICT SMT divergence examples on paired MES and MNQ charts. Match bar closes and use known reference highs or lows to check the disagreement.

Inversion Fair Value Gap chart examples

See an ICT inversion fair value gap form in both directions on fictional MES charts. Compare a confirming close beyond the zone with a wick-only break.

Breaker Block chart examples

Compare bullish and bearish ICT breaker blocks with a matching no-sweep example. See which candle confirms the break and when a retest can count.

Unicorn Model chart examples

Compare bullish and bearish ICT Unicorn setups on synthetic MES charts. Measure the breaker and fair value gap overlap, including a zero-width near miss.

Silver Bullet Times chart examples

Find the three ICT Silver Bullet times in New York, Chicago and UTC. Compare three fictional MES charts with gap confirmations and cutoff examples.

Power of Three chart examples

Compare bullish, bearish and failed ICT Power of Three sequences on synthetic MES charts. Freeze the range and check each phase in order.

Dealing Range chart examples

Mark an ICT dealing range on synthetic MES charts. Calculate equilibrium and see why the same price can be premium in one range and discount in another.

Internal vs. External Range Liquidity chart examples

See where an internal fair value gap and an external range high sit on two synthetic MES charts. Label a price using a range fixed before the move.

Draw on Liquidity chart examples

Mark a prior session high or low before the move. Three fictional MES charts show the target first, the opposite side first, and a bar that reaches both.

Daily Bias chart examples

Learn how to write an ICT daily bias before the move and compare three fictional MES replays where the draw is met, invalidated or expires.

Judas Swing chart examples

Compare bullish, bearish and late-reclaim ICT Judas Swing examples on synthetic MES charts with a fixed overnight range and New York clock.

New Day and New Week Opening Gaps

Mark the Globex close and reopen, then distinguish a midpoint touch from a full fill.

FAQ

Common Questions

Which ICT concept should I practice first?

Start with a single liquidity sweep around a level that was already visible. Then practice using a confirmed swing for a market structure shift and marking both wick boundaries of a fair value gap.

Can I use the same chart rules on another futures contract?

The chart definitions can be applied to other standard candlestick charts. Use that contract’s tick increment and define the session and timeframe before comparing examples.

Risk Disclosure

Futures trading contains substantial risk and is not suitable for every investor. TradeReign is a trading-discipline and rule-enforcement application. It does not provide trading advice, trade signals, investment recommendations, or performance guarantees.

TradeReign is not a broker-dealer, futures commission merchant, or investment advisor.

Futures trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Only risk capital - money that can be lost without jeopardizing financial security or lifestyle - should be used for trading. Past performance is not necessarily indicative of future results.