TradeReign
Back to HomeEducation HubCompatibilityAboutDisclosures
Futures Market Profile

Market Profile Single Prints, Poor Highs and Excess Read the TPO Shape Before Marking a Level

Peter Reznicek’s ShadowTrader commentary uses profile references such as single prints and excess to describe how the auction developed. Start with the observable shape. Separate the time spent at a price from the number of contracts traded there, then record what price does when it revisits the area.

Quick Answer

An interior single print is a price row traded in only one TPO period, between areas visited in multiple periods. Excess appears as a taper at the outer edge. A poor high or low has multiple periods sharing the extreme instead of a tapered edge.

Start 7-Day TrialMore Guides

Inside the range

Look for rows visited in just one period between areas that saw more activity.

At the extreme

Compare a tapered edge with a high or low that several periods share.

On a later visit

Keep the original profile fixed and record which rows trade again.

Read the Letters Before the Shape

A time-price opportunity, or TPO, marks that a price row traded during a period. A 30-minute period can place one letter on each row it touches. More trades at a row during that same period still contribute one letter. A volume profile would add the traded contracts instead.

You can count TPOs to find the widest row, or count contracts to find a volume point of control. Those methods can give different POCs and value areas from the same session. ShadowTrader describes its reported POC using volume. For the single prints below, count TPO letters.

Single Prints, a Poor Low, and Excess on One Profile

Periods A and B share the low at 6,000.00. There is no single-letter tail underneath them, so this example has a poor low. Period C alone reached 6,002.50 through 6,003.50, with multiple periods on the rows below and above that band. Those three interior rows are single prints.

At the high, only E reached 6,005.00 and 6,005.50. Period F remained below those rows. The two E-only rows taper at the upper edge and illustrate excess. A single-print band in the middle of the profile and a tail at an extreme can both contain one-letter rows. Their locations distinguish them.

Fictional ES time-price profile
PricePeriodsShape
6,005.50High-side excess
6,005.00High-side excess
6,004.50
6,004.00
6,003.50Interior single print
6,003.00Interior single print
6,002.50Interior single print
6,002.00
6,001.50
6,001.00
6,000.50
6,000.00Poor low
A through F are six completed 30-minute periods from 9:30 a.m. to 12:30 p.m. ET. Each row groups prices in 0.50-point steps for this example.

How a Developing Excess High Becomes a Poor High

At 10:30 a.m. ET, period A owns the two highest rows of this fictional ES regular session. Both contain one letter and sit above the shared AB rows. Mark the two-row selling tail as provisional excess.

Period C trades back up to 6,006.00 and stops there. At 11 a.m., the session high still reads 6,006.00, but the top row now reads AC. Two periods share the extreme, so the profile has a developing poor high. A candlestick chart can show the equal high. The TPO rows show exactly where C removed the tail.

In replay, save the 10:30 and 11 a.m. snapshots and the final regular-session profile. Use the first snapshot to review what you knew at 10:30. Log the exact retest and the later classification before looking for any trade through the high.

The same session high at 10:30 and 11 a.m. ET
Price10:30 ET11:00 ET
6,006.00
6,005.75
6,005.50
6,005.25
6,005.00
One ES tick per row. A covers 9:30–10:00, B covers 10:00–10:30 and C covers 10:30–11:00 a.m. ET.

When Is a Poor High Repaired?

Freeze the completed regular-session profile first. In this separate ES example, two periods share the extreme at 6,006.00 and the session printed no higher price. ShadowTrader treats a later trade through that level during regular trading hours as repair. For a poor low, apply the same check in the other direction.

At 7:35 p.m. ET, the overnight session trades 6,006.25. Record the overnight cross. The next morning, a print at 6,006.00 at 9:45 a.m. is a regular-session touch. The first regular-session trade at 6,006.25, at 10:20 a.m., is the repair in this example. With one tick per row, the move through is visible as a new price row.

By 11 a.m., periods B and C both reach 6,006.50, forming a new developing poor high. The old 6,006.00 reference has been traded through. The archived profile stays as it was, and the next session’s new high can still change before its close. Record the repair time and whether price holds above the level as separate observations.

Fictional ES regular-session TPOs near the prior high
PricePrior sessionNext session by 11 a.m. ET
6,006.50Untouched
6,006.25Untouched
6,006.00
6,005.75
6,005.50
Each row is one ES tick. Letters restart each session. On the second day, A covers 9:30–10:00, B covers 10:00–10:30 and C covers 10:30–11:00 a.m. ET.

Read a Late-Day Market Profile Spike at the Next Open

ShadowTrader calls a band of single prints created at a profile extreme in the final half-hour a spike. At the close, record the contract, session and two boundaries. In this fictional 9:30 a.m.–4:00 p.m. ET ES study, the high before the final M period was 6,005.25. Mark 6,005.50 as the base because it is the first new tick row, and mark 6,006.25 as the spike high. If your chart uses a different session close, verify which block is last before labeling the spike.

Classify the next regular-session opening trade before watching what follows. For this upward spike, 6,006.50 is above it, 6,005.75 is inside, and 6,005.25 is below. Treat prints at either boundary as inside for this exercise. ShadowTrader reads an open above as possible strength if trade builds there, an open inside as willingness to trade at the higher prices, and an open below as potential rejection of the late move. An opening print starts the observation.

For one replay drill, require the first two completed 30-minute blocks to each trade above 6,006.25 before recording evidence of acceptance above. Check at 10:30 a.m. ET when both are complete. If the first block trades above but the second stays at or below the spike high, record that the two-period test failed. Keep the previous profile and the opening classification fixed. For a spike at the low, mirror the comparisons. The test records participation around the old boundary and leaves trade entry, risk and performance questions for a separate review.

Fictional ES spike in the final 30-minute block
PricePeriodsShape
6,006.25Spike high
6,006.00
6,005.75
6,005.50First new row
6,005.25High before M
One tick per row. K, L and M are the final three blocks of this example’s cash-hours template. Only M, from 3:30 to 4:00 p.m. ET, traded the four rows above 6,005.25.

Track a Revisit Without Moving the Original Reference

For a forward test, record the contract, session start and end, price-row size, TPO duration, and the time you froze the reference. For this example, record the interior band as 6,002.50 through 6,003.50 after 12:30 ET. A row that appears single while the profile is developing can gain another letter.

If price later approaches from above, a trade at 6,003.50 touches the upper edge. A trade at 6,003.00 goes deeper. To mark the entire band as revisited, require observations in all three rows under your chosen data and row settings. A next-session visit does not alter the archived profile. It changes the status of that old reference in your log.

A poor low can stay untouched, and an excess tail can be revisited. Mark the outcome you actually observe, including no revisit through your chosen endpoint. Shapes help organize observations about the auction. This example makes no assumption about how often the levels hold.

Why wider TPO rows can hide single prints

The profiles below use the same fictional ES trades and the same 30-minute periods. At one tick per row, only C appears at 6,002.75 and 6,003.00. Now group those four tick prices into the two bands shown. Count each period once per band, even when it traded at both prices in that band.

The lower band contains B from 6,002.50 and C from both prices. The upper band contains C from both prices and D from 6,003.25. Each wider row has two letters, so the two interior singles disappear from the display. The underlying session trades stayed the same. A later price revisit would be a separate event.

For a comparison in TradingView’s TPO indicator, use Manual row size and set Ticks per row explicitly. Match the dated contract, profile period and block size first. Write down the price boundaries each chart actually groups, since different grouping can change the result. Compare the letters on those rows before using a projected line as a price reference.

One tick per row
PricePeriodsShape
6,003.25
6,003.00Single print
6,002.75Single print
6,002.50
C is the only period at the two middle prices.
Two ticks per row
PricePeriods
6,003.00–6,003.25
6,002.50–6,002.75
Each wider row combines periods from two adjacent prices.

Why Two TPO Profiles Can Look Different

Match the dated ES contract, session boundaries, period length, and price-row increments. A session split can shift the letters and remove overnight prices from the day profile. Coarser rows can combine prints that were separate at one tick per row.

In TradingView, look for the Time Price Opportunity chart or indicator and compare its block size, row size, and period settings with your other chart. Verify whether the platform’s projection rules mark interior rows, tails, or both. Record the actual rows before relying on an extension line.

Sources

Official References

Platform details on this page were checked against these official resources.

ShadowTrader spike rulesHow opening above, inside or below a late upward spike can frame the next session.Peter Reznicek’s Premarket PerspectiveShadowTrader’s use of single prints and profile references.ShadowTrader’s definition of profile repairWhy a regular-session repair and an overnight cross are different observations.CME E-mini S&P 500 futures contract specificationsCheck the minimum price increment for an ES futures row.ShadowTrader’s point of control conventionVolume POC compared with the widest TPO row.TradingView TPO indicatorHow to configure profile periods, block sizes, and price rows.TradingView TPO chartHow to read the chart’s letters, value area, and point of control.
Related Guides

Keep Building the Rule System

Compare two TPO profiles with the same low and POC

Check the row widths between the endpoints of a Market Profile 45-degree line.

Track the single prints between two distributions

Compare a hold with a rotation that fills the original single-print rows.

Read unfinished auctions on a footprint

Compare a same-price footprint reading with a flat TPO profile.

Set up a comparable TPO chart

Match time blocks and price rows in thinkorswim, TradingView, NinjaTrader, or Sierra Chart.

Compare four Market Profile opening types

Use the same opening price and prior value area to compare drives, reversals, and a two-way auction.

Compare overnight and regular-session POC tests

See which later visit counts for a completed profile.

Mark the futures initial balance

Measure the first hour’s high and low on a separate worked example.

Read a TradingView session volume profile

See how volume at price and a volume POC are built.

Set up a market internals Quad

Put ES beside NYSE participation measures in thinkorswim, TradingView, or Sierra Chart.

FAQ

Common Questions

Are single prints the same as low-volume nodes?

A TPO single print records one time period at a price row. A low-volume node records relatively little volume. The two can appear in different locations.

Can a developing poor low gain excess?

Yes. A later period can extend below the old low and add a tail, or repeat the extreme again. Freeze the profile at a stated time before judging a later visit.

Does an overnight trade repair a regular-session poor high?

Under ShadowTrader’s convention, repair requires a later regular-session trade through the poor high. Record an overnight cross or a regular-session touch separately.

Does a single print have to fill?

It can stay untouched. Track later touches and full revisits as separate outcomes and use the same cutoff for each example.

Risk Disclosure

Futures trading contains substantial risk and is not suitable for every investor. TradeReign is a trading-discipline and rule-enforcement application. It does not provide trading advice, trade signals, investment recommendations, or performance guarantees.

TradeReign is not a broker-dealer, futures commission merchant, or investment advisor.

Futures trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment. Only risk capital - money that can be lost without jeopardizing financial security or lifestyle - should be used for trading. Past performance is not necessarily indicative of future results.